About input power supply: single 3.7V lithium battery or two cells in parallel, such as 18650 battery, or nickel-cadmium/nickel-hydrogen battery pack, 4V or 6V lead-acid battery, etc.
product instructions:The module is divided into input and output. The red and green (white) lines are the input, the red and positive green (white) are negative, and the two thick high-voltage lines with the same color are the input. Fix the appropriate arc distance at the output end. When the input terminal is connected to the battery, high-voltage or high-temperature arc can be generated.
Precautions for module use:
1. The high -voltage module should be used to use it to use it when high -voltage and empty load. Before power -on, you must adjust the appropriate distance between the high -voltage line end. The high -voltage line pull -up distance is directly proportional to the battery voltage and capacity used. When testing the arc distance from short to long experiments,When the power is poweredIt is strictly forbidden to exceed the longest arc distance,,Because high -voltage energy cannot be released, it is easy to damage the module.
3. The power of the module is large, and it should not be dissipated inside, so it should not work for a long time.
4. Determine whether the battery capacity can drive the maximum power to the maximum power is to measure the battery voltage during the arc.The maximum power can be output around 6V.
5. The two small-capacity lithium battery cells are connected in series at 7.2V (not recommended in series). In the arc pull state, the measurement voltage has dropped to about 4V. The smaller the capacity, the lower the voltage will pull.Therefore, it is recommended to use lithium batteries above 2000 MA. If conditions permit, it is best to use batteries above 4000 MA.
