The following summary reference is made according to various questions that customers often appear:
The voltage display is normal, the current display0.00or0.0
Make sure that the thick black wire is connected to the negative electrode of the battery and the thick red wire is connected to the negative electrode of the load.(Note that the wiring between discharge and charging is different, see the followingThe concept of load and power supply).(The watch header has undergone very strict testing and calibration when leaving the factory to ensureThere is no quality problem to leave the factory.Encountered current display0Case99.99%The wiring is wrong, please check the wiring patiently and carefully)
The current display is inaccurate
If it is a direct power supply or an independent power supply power supply and the equipment power supply, as long as the fine black line is disconnected, it can be accurate.
Do not display the power supply
Anyone who passes through the flow of AC power must be connected to one1000uFThe above electrolytic capacitance is filtered to supply the header.
Other precautions
The measurement current can only be chanted in the negative and negative electrodes of the power supply.
voltage range:5The head supply voltage range of the root line is4~28V, That is, the voltage of the fine red line cannot exceed more28VEssence
The concept of load and power supply
During discharge: battery, switching power supply, transformers are power, resistance, electric lights, motors, and power equipment are loads.
When charging: charger, generator, solar energy is power supply, battery and battery are load.


