Model: LPD3806-400BM-G5-24C


Adopt a new solution design.Batch production, a lot of stocks.
brand new!!AB two-phase incremental photoelectric rotary encoder, 360 pulses, 400 pulses, 600 pulses in large quantities, including NPN current collectorPolar opening output and voltage output two output methods.
Standard 1.5-meter wires are equipped. If you need to extend the wire, you can negotiate with the store.Please note how many pulses are needed and how to output them when purchasing.(Automatically taken, our store defaults to shipping with 400 pulse NPN open collector output)
Model: 400,600,360P/R incremental rotor coder, AB two phases.90 between the A phase and the B phase&The generation of deg; phase can identify the forward and reverse directions to complete the addition and subtraction counting pulse signals.
Performance:400,360,600 pulse/change.Working voltage: DC5-24V,,The mechanical speed is 5000 rpm, the electrical frequency is 20K/second, and the comprehensive speed is 2000 rpm. Size: Encoder body size:φ38mm;axisφ6&Times; 13mm; the outside shaft platform is 5mm high,Φ 20mm; fixed holes are: M3 screws, 3 installation holes are on the round of 30, and the other 3 installation holes are on 28 rounds;
Wiring method: green = A phase, white = B phase, red = VCC positive power supply, black = v0 land, please follow the above method.There are also metal shielding mesh anti -interference.
Output:AB two-phase output rectangular orthogonal pulses, and the circuit output is NPN open collector output type. This output type can be directly connected to a microcontroller or PLC with internal pull-up resistor, such as a 51 microcontroller or Mitsubishi PLC (the input method of the PLC should be that the switch is connected to 0V to function). Note: If the encoder is not connected to the device, it cannot be directly oscilloscope oscilloscope (the open collector output has no voltage output when there is no pull-up resistor). If you want to oscilloscope, please add two pull-up resistors to the two-phase output of AB;
use:Used to measure the rotation speed, angle, acceleration and length measurement of the object.
Scope of use:Smart controls suitable for various displacement changes, fully automatic long -term automatic automatic leather machines, steel bars fixed cut controller, civilian tall body scale, college student competition robots, etc.
Features:It has a significant advantage of small size, light weight, convenient installation, and high cost performance.
Precautions:Do not connect VCC directly with the output cable in the A phase, otherwise, the output three -level tube will be burned.