\ \
\ \
\ \
What is blown out is a big bubble!Please watch the video!
\ \
\ \
Buy now and get a battery + bubble concentrate + stickers!!!
\ \
\ \
Camera usage precautions, correct use can extend service life
\ \
\1. Don’t put too much bubble liquid Add less each time (about one-third of a bottle) You need to emptiate the air and pump water for the first time. It will take about 2 minutes to bubble. Please press it patiently for a while
\2. When playing, try to keep it straight and wipe the bubbles clean with a tissue!Inverted or inclined too much, water leakage will be leaking, and it is easy to make the liquid into the circuit board short circuit
\3. Use ordinary cheap carbon batteries. Don’t use rechargeable batteries. Don’t use expensive Nanfu and other strong alkaline batteries (this is very important, very important! Many people say that they break after using it once or twice, and this is basically the reason! Please note!!!)
\ \
\ \
\ \
This product is adoptedPatent for leak protection,CanPrevent liquid leakage to a large extentBut it's currently on the marketNo100%A bubble machine that does not leak,Do not shootEssenceGenerally, severe fluid leakage is mostlyDefective delivery,Contact us after-sales serviceFree re-send to you!
\ \
Try to keep theBubble machine lay flat,,Don't be too tilted, please dry the bubble machine after use andRemove the battery!!If you don't play with it, please put the toysFlat lay (upright)
\ \
There is a leak-proof plugSmall ventilation holes,In order to makeLiquid circulation,Do not hold or tilt too much
\ \
If it appears during the gameThe bubbles will not form or become large foam.may beThe bubble liquid is too loworIf the battery is insufficient, just replace it.The first bubble is out due to the long conduit, and the air needs to be discharged.Please wait a moment.If the new camera does not come out of the bubble, repeat and press it several times.
\ \
Please add bubble liquidCompletely tear the leak-proof film of the bubble liquid,Tighten the cover that adds the cover and add it to the product.Do not plug too tightly when adding, leaving a gap to allow air to circulate and avoid overflow.Add water for about every timeThe transparent plate on the back is about 1/2 (new modelSmall green bottle plus half a bottleJust go),Prevent excessive bubble liquid from overflowing.
\ \
This store refuses becausePersonally brokenThe malicious evaluation caused by it is not a quality problem if you break it.
\ \
BubbleyesBubbleBrand 3C products,,safe and non-toxicsafe to use!
\ \
\ \
\ \





































\ \
\ \
\ \
\ \