| Status: | New |
| In stock: | 99999 PCs |
| Approx weight: | 0 kg |
| Sales volume for 30 days: | 10 |
| Price per 1 piece : | 72.80 $8.03 $ |
| Local delivery: | 0.00 $ |
| Quantity: | + - |
| Total: | 8.03 $ |
| Name: | wangysd |
| Shop name: | 清风工作室一店 |
| Add vendor to favourites | |
| Brand: | QING FENG; |
Seiko -made CD chassis, directly support the installation of the original CD rack, make full use of the scientific mechanical structure of the original factory;
Moby is convenient, and the best hearing visual effect is obtained with the lowest cost.
The chassis material is all aluminum, except screws.
Dimension size: 430x height 90x depth 358 358 Internal size: width 400x height 84x deep 347
Silver drawing, the rest of the black brushes The chassis structure is six -sided detachable default rear panel only one power seat hole
The thickness of the panel is 8-10mm, the lower panel is 3mm, the upper plate is 3mm, and the two sides are 4mm profile, and the rear panel is 3mm.
The distance between the key pore is 27.5mm
Friends who buy this chassis, please be sure to have a certain ability to process the machine processing. No one is not recommended to buy it.
Case standard accessories:
Imported acrylic window glass button  switch, power socket (without fuse), rubber feet enter and exit the warehouse baffle.
You can install many M4 suits and bald components.
Of course, it also directly brings the board belt assembly of the original CDM4 machine directly, such as the domestic Star River, the aircraft AK640, etc.
Bringing the mouth cover;The display window is relatively large and can be installed for various types of machine screens and remote control windows.There are enough installation holes on the back to facilitate DIY operations.
In the key section, I use a new opening, stop, cycle, retreat, enter, pause, play these buttons (the panel buttons need to be confirmed with you).It doesn't match, it doesn't matter. You can use the hole board to make a keyboard and connect to the flying wire.
The shortcomings of low -end CDM4 original machines (such as AK640, Xinghe, etc.) are mainly due to
1. The shock resistance performance of the chassis is not good. There are plastic and thin iron skin.
2. The power supply part is too weak, and the + -10V part has no voltage. The whole machine uses a set of power: the spindle motor, control display, digital processing, bald head, decoding output, etc. All rely on a small transformer of 9V.
3. The materials of the original machine, and the aging of related components (these machines have been less than 10 years, and the electrolysis basically has different degrees of aging))
If the above points are strengthened, it will inevitably achieve more effort.The supporting characteristics and shock absorption performance of the official designed by Philips are not comparable to just having an aluminum bracket on the market; so I think the M4 entry and exit warehouse is worth playing ~~
The standard is the normal switch button
Can be upgraded to angel eye ring light switch (+16 yuan)
The distance between the controller key is 27.5mm
Backboard size: 410mm x 84mm (only one power seat hole in the rear panel of the default can be customized, and the cost is calculated separately)
