| Sort by color: |
|
| Status: | New |
| In stock: | 792 PCs |
| Approx weight: | 0 kg |
| Sales volume for 30 days: | 1 |
| Price per 1 piece : | 3.88 $ |
| Local delivery: | 0.00 $ |
| Quantity: | + - |
| Selected configuration: | Sort by color: Single mouth (without watch) |
| Total: | 3.88 $ |
| Name: | 唯福酒店用品直营店 |
| Shop name: | 唯福酒店用品直营店 |
| Add vendor to favourites | |
| Sort by color: | Single mouth (without watch); Double mouth (without watch); Single mouth (with table); Two mouths (with table); Single -mouth without table+1.5 meters tube; Two mouths without tables+2 meters tube; Single -mouth with table+1.5 meters tube; Two -mouth belt table+2 meters tube; Single -mouth without tables+2 meters tube; Together without tables+3 meters tube; Single -mouth with table +2m pipe; Two -mouth belt table+3 meters tube; Single-mouth without a watch + 3-meter tube; Together without tables+5 meters tube; Single-mouth watch + 3-meter tube; Two mouthbands+5 meters tube; 5 valve head rubber pads; 5 stainless steel pipe clip 5; Wrench stainless steel; Buy trachea alone for 1 meter and 6 yuan; Copper switch key, tee; Copper direct band switch; |
| Brand: | Human resources; |
| Model: | JYT0.6 cannot adjust pressure; |
| Place of origin: | Chinese mainland; |
| Province: | Zhejiang Province; |
| City: | Ningbo City; |
| Production license number: | XK21-006-00167; |
| Range: | 0.6m3/h; |
| Import pressure: | 30-1560Kpa; |
| Outlet pressure: | 2.80±0.50Kpa; |
| Close the pressure: | ≤3.50Kpa; |
brand:Gemanpower
This product is insured by China People's Property Insurance Co., Ltd.
Production license number:XK21-006-00167
Import pressure: 30-1560Kpa
Outlet pressure: 2.80±0.50Kpa
Range:0.6m3/h
Close the pressureThe≤3.50Kpa
Product FAQ
1.Why do the product have some scratches and paint defects?
Answer: Because our products are zinc alloy products, they inevitably rub against each other during the inspection and sorting and packaging process, and some scratches may occur, which will not affect the quality. Friends who care about it should not buy it. Thank you..
2.Why is the stove fire uneven, intermittent, or the fire is too strong and all red flames?
answer:This is the gas stoveAirToo much air leads to flames leaving the fireDisconnected,,This isThe air door under the gas stoveIt's too big, justGuan XiaoJust one .If the fire is strong and the red flame is the damper is closed, just open the damper of the gas stove a little wider.Remember that these situations have nothing to do with the gas valve.
3.Why is the firepower very small, the fire is not strong, and the burning is slow?
Answer: The amount of firepower andnot oneLowThe pressure valve can be improved.LowIs the auxiliary function of the pressure valve? The key is yoursfurnaceStove, youfurnaceOn the stoveBe out of breathThe nozzle is only so big, what's the point of changing itLowThe pressure valve effect is also not obvious.The heat efficiency is very important whether a stove is good or not.qualityOKfurnaceThe stove, the gas and air ratio are sufficient, and the burning is blue flame and the heating pot speedWillSoon, soIt's not a low-pressure valve that can completely improve the firepower of your stoveEssencePlease know, thank you.
4.Why is the stove or water heater not burning, and the firepower is different from before?Is there a loud noise when the fire is ignited?
Answer: For each stove, the manufacturer has clearly stated what gas valve to use and what atmospheric pressure and flow rate to use.The stoves are divided into low-pressure stoves, medium-pressure stoves, and high-pressure stoves. The valves also include high-pressure valves, medium-pressure valves, and low-pressure valves.Low-pressure valves also have different pressure flow rates, such as0.6 As well as1.2 As well as2 As well as5Cubic pressure flow rate.So the size of your stove you used before was to buy it, or ask the merchant who sold the stove, and then look at the instructions to determine how big the valve you need to use for the stove.Our gas valves are all national standards and have been tested after leaving the factory, so there is no quality problem.
5.Why does the meter pointer remain unmoved after installing the gas valve with a meter valve?
Answer: Due to the cold weather, when the air pressure solidification gas inside was insufficient when it was installed, the upper limit of the air pressure solidification gas inside was insufficient, so the pointer of the meter could not be displayed immediately. After using it for a period of time, the upper limit of the meter in the bottle gradually began to have instructions.
6.Why does the pointer of the gas valve pressure gauge not respond after a period of use, or is it full of gas?
Answer: Because the gas pressure gauge mainly relies on the upper limit pressure of the gas in the bottle to cause the needle to rotate, a small amount of gas will not affect the upper limit pressure of the gas in the bottle. When the gas in the bottle is greatly reduced and the upper limit pressure drop is small, the pointer will retreat.
7.Why is there no gas? When you twist out the gas valve, you feel that the gas cylinder still has gas, which is heavier than when you are empty. Are you not using up the confidence of the bottle?
Answer: That's because gas slag is stored in the gas cylinder. The smell of gas slag is thicker and smellier than gas odor, and gas slag cannot burn.Therefore, the gas cylinder cannot be upside down or placed horizontally after using gas, because it is because the gas slag inside runs out and blocks the gas valve or the stove's air outlet nozzle.The gas slag also has weight. When inflated, remember to instruct the personnel at the gas station to pour out the gas slag.
8.Why can't the threads be screwed in when the gas cylinder is installed with a gas valve? Half of the screwed in is inclined?
Answer: Our gas valves are all national standard connectors.Gas tank gasAngle valve switchFollow upgasThe valve position is relatively narrow,,When rotating the gas valve, it often hinders the hand, resulting in the thread being inadequate and not being installed.Therefore, it is necessary to install a gas valve. First of all, the person should stand at the front of the gas cylinder, and the hand must follow the trend.gasValve head threads must be aligned, can't be tilted,,ThenSlowly screw in , tighten to sit and loose to the right.If the angle valve of the gas tank is too long, the thread ages, you can add some lubricating oil.
9.Why is the gas valve very light and seems very thin?
Answer: Since the entire valve shell of the gas valve is made of zinc alloy material, the difference between zinc alloy and iron and steel is that it does not rust, does not corrode, and is very light and thin.Therefore, the materials of all gas valves are made of zinc alloy. The quality of gas valves is not light or heavy, but safe, sealed and stable.
10.Why is the adjustable gas valve still not much after adjusting the firepower?
Answer: Because our gas valve can adjust the flow pressure0.6-1.2In a small range, this is a national standard gas valve produced by a regular manufacturer. The air output is within the national specified range, so the pressure regulation effect is not obvious, but the advantage lies in safety and stable air pressure.In addition, the stove itself has a large air outlet nozzle, and the air valve is only to concentrate the fire.If the stove demand is relatively large, it is recommended to use a valve with a higher flow pressure, thank you.
Instructions and precautions:
1. This pressure regulator is used for bottled liquefied petroleum gas.
3. Before use, check whether the filter and sealing ring on the air inlet side of the voltage regulator should be intact.
4. During installation, please turn the handwheel and tighten the bottle valve. Do not pull the valve body of the pressure regulator. After installation, use soapy water to check whether there is any leakage in each connection area. Do not check with open flame.
5. This voltage regulator has been debugged before leaving the factory. Users should not adjust it without authorization. If a malfunction occurs during use, they should be sent to the professional maintenance department for repair or contact our factory in time.Users must not dismantle and repair it themselves.
6. If the voltage regulator fails, it should be sent to a professional maintenance department for maintenance or contact the manufacturer.Users are not allowed to adjust or repair arbitrarily to ensure safety.
7. When this product has been in use for two years, maintenance testing or replacement should be carried out.
8. Please refer to the requirements of this description and use it reasonably.To ensure safety
