Strong electric door magnetic switch, hotel wardrobe switch, hotel wardrobe switch, square normally open sensor, including a sensor and magnetic steel.
The sensor is a proximity switch operated with magnetic field induction, including a square housing and wires.The approach of the magnet or away from the controllable closure or opening of the sensor.When the wardrobe door is closed, the light goes out.When the door is opened, the light is on.
The features of the wardrobe door magnetic switch are:
1) Power used: Maximum load 50W Energy-saving lamp 600V/4A
2) Use voltage: 100V-220V (AC or DC)
3) The switch is normally open.When the wardrobe door is closed, the light goes out.When the door is opened, the light is on.
4) Product size:
Plastic square surface-mounted size: 27*14*8mm
Plastic center dark to size:10*24mm, Magnetic steel: Φ:10*18/12mm
Copper shell: : Φ: 10*29mm, magnetic steel: Φ: 10*12mm
Applicable range of sunlight, energy -saving lamp, fire light
Housing material: Copper
Installation type: Concealed installation
Installation method:
1. The sensor (with wire edge) should be installed on the door frame, and the magnetic edge (without wire edge) should be installed on the door.
2. The sensor and magnetic edge must be installed parallel to the door. The gap between the sensor and magnetic edge should not be greater than 10MM.
3. Be sure to install the load (fluorescent lights, energy-saving lights, spotlights) first and turn on the power supply.
4. The power supply is not divided into positive or negative.









- -_- -
- -_- -- -_- -- -_- -- -_- -