
Large Size: 15mm×15mm×48mm
Thread diameter: 14.2mm
Oil tip on the burner, original Danfoss, Denmark
The traffic is between 0.3-35#
The angles are 60 degrees, 45 degrees, 30 degrees, and 80 degrees respectively
Atomization method is solid, semi-solid, hollow
Currently, the 60-degree and 45-degree solid
Small oil nozzle is a copper sand filter, medium oil nozzle is a steel filter, large oil nozzle has no filter
You can use light oil or heavy oil
EN series oil nozzle flow rate from 1.46 to 6.55 kg/h
Standard series oil nozzle flow rate from 0.30 to 35 USgal/h
100% out of factory test
Oil nozzle flow meter (under different pressures, the fuel flow rate emitted is different. At 7 bar, it is the nozzle's marked flow rate, which is generally multiplied by 3.122 to convert to kg/h)
Danfoss/Danfoss nozzle series products are widely used in various combustion machines on the market. Our nozzles are produced strictly in accordance with the standards of N293 and EN299 and are tested 100% using advanced equipment. Danfoss recommends that the nozzles are best replaced every year, even if it is still usable.




















